34
Printing Photographs Directly from a Digital Camera
About “Image optimize”
When you have selected
Default
(selections based on the printer setting), the printer
operates based on the
PictBridge settings
screen.
If you use a Canon PictBridge-compliant device, you can select
VIVID
,
NR
,
Face
or
Red eye
.
(Note that these options cannot be selected for some models.)
About “Date/File No. print”
You cannot change this setting. This setting depends on the PictBridge compliant device.
If you select an image which has had the shooting date embedded in it using a camera with
print mode, select
Off
for this function. If you select
Date, File No.
, or
Both
, the date or file
number will be printed over the embedded date.
Confirming and Changing PictBridge Print Settings from the Printer
This section describes how to change the print settings of the PictBridge standard such as
the paper size and the media type.
How to display the PictBridge settings screen and change the settings:
1
Turn on the printer.
See “Turning On the Printer” on page 10.
2
Display the
PictBridge settings
screen.
(1)
Display the settings screen.
See “Basic Operation for the Operation Panel” on page 7.
(2)
Select
Device settings
and then press the
OK
button.
(3)
Select
PictBridge settings
and then press the
OK
button.
The
PictBridge settings
screen is displayed.
3
Confirm and change the settings.
(1)
Select the setting item and then press the
OK
button.
(2)
Select the selecting item and then press the
OK
button.
(3)
Confirm the print settings, select
Next
, and then press the
OK
button.
Note
When
VIVID
is selected, green and blue portions of photos are printed vividly.
When
NR
(Noise Reduction) is selected, noise in blue portions, such as the sky, and dark
portions is removed.
When
Face
is selected, backlit images are corrected when printed.
When
Red eye
is selected, a person with the red eye on a photo is corrected when printed.
Note
Never disconnect the USB cable during printing, except for when the PictBridge Compliant
device allowed to disconnect the USB cable. When disconnecting the USB cable, follow the
instructions given in the device's Instruction manual.
Controls of the digital camera cannot be used for the following:
– Print quality setting
– Printer maintenance
