manualshive.com logo in svg

Canon Pixma MG7100 Series, Online Manual

Share
Download
Canon Pixma MG7100 Series Online Manual Download Page 386

Loading Envelopes

You can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver
properly.

 Important

 Printing of envelopes from the operation panel or from a digital camera is not supported.
 Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction.

- Envelopes with an embossed or treated surface
- Envelopes with a double flap
- Envelopes whose gummed flaps are already moistened and adhesive

1.

Prepare envelopes.

 Press down on all four corners and edges of the envelopes to flatten them.

 If the envelopes are curled, hold the opposite corners and gently twist them in the opposite direction.

 If the corner of the envelope flap is folded, flatten it.

 Important

 The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make sure that no curl or

puff exceeds 0.1 inches (3 mm).

 Do not flatten the leading edge of envelopes. Otherwise, the printing position may shift out of place.

2.

Load envelopes.

(1)

 Pull out the cassette (lower) from the machine.

(2)

 Slide the paper guide 

(A)

 in front and 

(B)

 on the right to open the guides.

133

Summary of Contents for Pixma MG7100 Series

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands