manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 725

Check3

 Is the machine selected to connect external communication devices (e.g.

computers, smartphones, or tablets)?

Select an access point name (SSID) specified for the machine as a destination for external communication
devices.

Check4

 Enter a password if you specify it for the machine.

Check5

 Make sure that external communication devices are not placed far away from

the machine.

Do not locate external communication devices too far away from the machine.

Check6

 Make sure that there is no obstruction.

Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.

Check7

 Make sure that there is no source of radio wave interference in your vicinity.

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.

Check8

 Are you trying to connect 6 devices or more?

You can connect up to 5 devices using the access point mode.

Cannot Print or Scan from a Computer Connected to the Network

Check1

 Make sure that the network settings of the computer are correct.

For the procedures to set up the computer, refer to the instruction manual of your computer or contact its
manufacturer.

Check2

 If the MP Drivers are not installed, install them.

Install the MP Drivers with the Setup CD-ROM or install them from our website.

Check3

 Make sure that access control is not set to the access point.

For the procedures to connect an access point and set it up, refer to the instruction manual of your access
point or contact its manufacturer.

Note

• To check the MAC address or the IP address of the computer, see 

Checking the IP Address or the MAC

Address of the Computer

.

725

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands