Canon PIXMA MG5600 Series Online Manual Download Page 508

Page: 508 / 910

Copying Photos

You can scan printed photos and print them all at one time.

Make sure that the machine is turned on.

Load the photo paper.

3. Select

Advanced print

on the

HOME

screen.

LCD and Operation Panel

4. Select

Photo copy

, then press the

button.

5. Confirm the on-screen instructions, then press the

button.

6. Load the printed photo on the platen glass following the on-screen instructions, then press

the

button.

Note

• For details on loading photos on the platen glass:

Loading Originals

When scanning is complete, the print settings confirmation screen is displayed.

7. Specify the settings as necessary.

Use the

button to change the setting item and use the

button to change the setting.

Note

• Depending on the setting item, some settings cannot be specified in combination with the setting

of other setting items. If the setting cannot be specified in combination is selected,

Error details

displayed on the LCD. In this case, press the left

Function

button to confirm the message, then

change the setting.

Page size

Select the page size of the loaded paper.

508

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA MG5600 Series, Online Manual

Search results

Summary of Contents for PIXMA MG5600 Series

Reviews:

Brands by name

Popular brands