manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 445

Page Border

Prints a page border line around each document page.
Check this check box to print the page border line.

Tiling/Poster Printing dialog box

This dialog box allows you to select the size of the image to be printed. You can also make settings for cut
lines and paste markers which are convenient for pasting together the pages into a poster.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.

Preview Icon

Shows the settings of the 

Tiling/Poster Printing

 dialog box.

You can check what the print result will look like.

Image Divisions

Select the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create a
larger poster.

Print "Cut/Paste" in margins

Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as
guidelines for pasting together the pages into a poster.
Check this check box to print the words.

Note

• Depending on the type of printer driver you are using and the environment, this function may not

be available.

Print "Cut/Paste" lines in margins

Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a
poster.
Check this check box to print the cut lines.

Print page range

Specifies the printing range. Select 

All

 under normal circumstances.

Select 

Pages

 to specify a specific page or range.

Note

• If some of the pages have not been printed well, specify the pages that do not need to be printed

by clicking them in the settings preview of the 

Page Setup

 tab. Only the pages shown on the

screen will be printed this time.

Booklet Printing dialog box

This dialog box allows you to set how to bind the document as a booklet. Printing only on one side and
printing a page border, can also be set in this dialog box.
The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.

Preview Icon

Shows the settings made on the 

Booklet Printing

 dialog box.

You can check what the document will look like when printed as a booklet.

445

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands