manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 321

About Firewall

A firewall is a function of the security software installed in the computer or operation system for computer,
and is a system that is designed to prevent unauthorized access to a network.

Precautions When a Firewall Function is Enabled

• A firewall function may limit communications between a printer and a computer. This may disable

printer setup and communications.

• During the printer setup, you may be prompted to enable or disable communications, depending on

the firewall function of the security software or operation system. If so, choose to enable
communications.

• When using IJ Network Tool, you may be prompted to enable or disable communications, depending

on the firewall function of the security software. If so, choose to enable communications.

• If you cannot set up the printer, temporarily disable the firewall function of the security software or

operation system.

Important

• If you disabled the firewall function, disconnect your network from the Internet.

• Some applications (like the network configuration software) override firewall settings. Check the

application's settings beforehand.

• If the printer you use is set to 

Get IP address automatically

, the IP address changes every time the

printer connects to the network. This may disable printer setup and communications, depending on
the firewall settings. In this case, either change the firewall settings or assign a fixed IP address to the
printer. An IP address can be set using IJ Network Tool.

Changing the Settings in the Wireless LAN Sheet

Changing the Settings in the Wired LAN Sheet

When assigning a fixed IP address to the printer, you will need to specify an IP address with which the
computer can communicate.

Note

• For the operation system firewall settings or the security software firewall settings, refer to the

instruction manual of the computer or software, or contact its manufacturer.

321

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands