manualshive.com logo in svg

Canon PIXMA MG5600 Series, Online Manual

Share
Download
Canon PIXMA MG5600 Series Online Manual Download Page 291

1.

Enable printer access control(MAC address)

Select to enable access control to the printer by MAC address.

Note

• The two types of access control (i.e., by MAC address and by IP address) can be enabled at

the same time.

An access control type is enabled as long as the 

Enable printer access control

 check box is

selected, regardless of the type currently displayed by selecting in 

Printer Access Control

Type:

.

• When both access control types are enabled at the same time, a computer or a network device

whose address is registered to either list will be allowed access to the printer.

2.

Accessible MAC Addresses:

Shows the registered MAC addresses and any comments.

3.

Edit...

The 

Edit Accessible MAC Address

 screen is displayed to edit the settings selected in 

Accessible

MAC Addresses:

.

Edit Accessible MAC Address Screen/Add Accessible MAC Address Screen

4.

Add...

The 

Add Accessible MAC Address

 screen is displayed to register the MAC address of a computer or

a network device from which to access the printer over the network.

Important

• Add the MAC address of all computers or network devices within the network from which to

access the printer. The printer cannot be accessed from a computer or a network device that is
not on the list.

5.

Delete

Deletes the selected MAC address from the list.

When Selecting IP address

The accessible computers or network devices are specified by their IP addresses. Computers or network
devices whose IP addresses appear on the list are allowed access.

291

Summary of Contents for PIXMA MG5600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands