Home
/
Canon
/
PIXMA MG5500 Series
/
Online Manual

Canon PIXMA MG5500 Series, Online Manual, Page: 183 / 302

Share

Page: 183 / 302

Canon PIXMA MG5500 Series Online Manual Download Page 183

Cleaning the Paper Feed Roller

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed
properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so
perform this only when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1.

Make sure that the power is turned on.

2.

Select

Roller cleaning

.

(1)

Select

Setup

on the

HOME

screen.

LCD and Operation Panel

The setup menu screen will appear.

(2)

Select

Maintenance

, then press the

OK

button.

The

Maintenance

screen will appear.

(3)

Select

Roller cleaning

, then press the

OK

button.

The confirmation screen will appear.

(4)

Select

Yes

, then press the

OK

button.

3.

Clean the paper feed roller without paper.

(1)

Follow the message to remove any paper from the front tray.

(2)

Press the

OK

button.

The paper feed roller will rotate as it is cleaned.

4.

Clean the paper feed roller with paper.

183

«
...
181
182
183
184
185
...
»

Summary of Contents for PIXMA MG5500 Series















































































































































































































































































































Reviews:

No comments