Canon PIXMA MG3660, Online Manual

Page: 499 / 676

Click Hardware to check the MAC address.
Checking Communication Between the Computer, the Printer, and the
Wireless Router
Perform a ping test to check if communication is taking place.
• For Windows:
1. Select Command Prompt as shown below.
◦ In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command
Prompt is not displayed on the Start screen, select the Search charm and search for
" Command Prompt ".
◦ In Windows 7, Windows Vista, or Windows XP, click Start > All Programs > Accessories >
Command Prompt .
2. Type ping command and press Enter .
The ping command is as follows: ping XXX.XXX.XXX.XXX
"XXX.XXX.XXX.XXX" is the IP address of the target device.
If communication is taking place, a message like the one shown below appears.
Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255
If Request timed out appears, communication is not taking place.
• For Mac OS:
1. Start Network Utility as shown below.
◦ In Mac OS X v10.10 or Mac OS X v10.9, select Computer from Go menu of Finder, double-
click Macintosh HD > System > Library > CoreServices > Applications > Network Utility .
◦ In Mac OS X v10.8 or Mac OS X v10.7, open Utilities folder in Applications folder and
double-click Network Utility .
2. Click Ping .
3. Make sure Send only XX pings (XX are numbers) is selected.
4. Enter IP address of target machine or target wireless router in Enter the network address to
ping .
5. Click Ping .
"XXX.XXX.XXX.XXX" is the IP address of the target device.
A message such as the following appears.
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms
--- XXX.XXX.XXX.XXX ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
499