Canon Pixma MG3500 Series Online Manual Download Page 85

Page: 85 / 769

Scanning in Advanced Mode

Use the

Advanced Mode

tab to specify the color mode, output resolution, image

brightness, color tone, etc. when scanning.

Refer to "

Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)

" to

scan multiple documents at one time.

Important

The following types of documents may not be scanned correctly. In that case, click

(Thumbnail) on the Toolbar to switch to whole image view and scan.

Photos that have a whitish background
Documents printed on white paper, hand-written text, business cards, etc.
Thin documents
Thick documents

The following types of documents may not be scanned correctly.

Documents smaller than 1.2 inches (3 cm) square
Photos that have been cut to various shapes

Place the document on the Platen, then start ScanGear (scanner driver).

Placing Items (When Scanning from a Computer)

Starting ScanGear (Scanner Driver)

Click the

Advanced Mode

tab.

The tab switches to

Advanced Mode

Summary of Contents for Pixma MG3500 Series


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands

Canon Pixma MG3500 Series, Online Manual

Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands