Canon Pixma MG3500 Series Online Manual Download Page 605

Page: 605 / 769

Operation Panel

* The Wi-Fi and

Alarm

lamps are shown lit in the illustration below for explanatory purposes.

(1)

ON lamp

Lights green after flashing when the power is turned on.

Note

ON and Alarm lamps

You can check the status of the machine by the

and

Alarm

lamps.

–

lamp is off: The power is off.

–

lamp lights green: The machine is ready to print.

–

lamp flashes green: The machine is getting ready to print, or printing is in progress.

–

Alarm

lamp flashes orange: An error has occurred and the machine is not ready to print.

"Support Code Corresponding to the Number of Flashes of the Alarm Lamp" in If an Error Occurs

–

lamp flashes green and

Alarm

lamp flashes orange alternately: An error that requires contacting the

service center may have occurred.

"Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp" in If

an Error Occurs

(2)

ON button

Turns the power on or off. Before turning on the power, make sure that the document cover is closed.

Turning the Machine On and Off

(3)

Wi-Fi lamp

Lights or flashes blue to indicate the wireless LAN status.

Lights:

Wireless LAN connection is enabled.

Flashes:

Printing or scanning over wireless LAN. Also flashes while configuring the wireless LAN connection.

(4)

Wi-Fi button

Hold down to automatically set up the wireless LAN connection.

(5)

ink lamps

Summary of Contents for Pixma MG3500 Series


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands

Canon Pixma MG3500 Series, Online Manual

Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands