Canon Pixma MG3500 Series Online Manual Download Page 595 | Manualshive

Page: 595 / 769

background image

Safety Precautions

Choosing a location

Do not install the machine in a location that is unstable or subject to excessive vibration.
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a
heating source.
To avoid the risk of fire or electric shocks, use the machine under the operating environment specified in the
On-screen Manual.
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.

Power supply

Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the power cord
if necessary.
Never remove the plug by pulling on the cord.
Pulling the cord may damage the power cord, leading to possible fire or electrical shock.
Do not use an extension lead/cord.

Working around the machine

Never put your hands or fingers in the machine while it is printing.
When moving the machine, carry the machine at both ends. In case the machine weighs more than 14 kg, it is
recommended to have two people lifting the machine. Accidental dropping of the machine causes injury. For
the machine's weight, refer to the On-screen Manual.
Do not place any object on the machine. Especially do not place metal objects (paper clips, staples, etc.) or
containers of flammable solvents (alcohol, thinners, etc.) on top of the machine.
Do not transport or use the machine on a slant, vertically or upside-down, as the ink may leak and damage the
machine.

Working around the machine (For the multifunction printer)

When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The Platen Glass
may break and cause injury.

Print Heads/ink tanks and FINE Cartridges

Keep ink tanks out of the reach of children. In case ink* is accidentally licked or swallowed, rinse out mouth or
give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical advice immediately.
* Clear Ink contains nitrate salts (For models containing Clear Ink).
In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash
with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately.
Never touch the electrical contacts on a Print Head or FINE Cartridges after printing.
The metal parts may be very hot and could cause burns.
Do not throw ink tanks and FINE Cartridges into fire.
Do not attempt to disassemble or modify the Print Head, ink tanks, and FINE Cartridges.

48

«
...
593
594
595
596
597
...
»

Summary of Contents for Pixma MG3500 Series


































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pixma MG3500 Series

imagePROGRAF W8400

Brand: Canon Pages: 24

imagePROGRAF TZ-30000

Brand: Canon Pages: 66

imagePROGRAF W7200

Brand: Canon Pages: 126

imagePROGRAFi iPF840 series

Brand: Canon Pages: 149

Brand: Canon Pages: 166

iP4000 - PIXMA Photo Printer

Brand: Canon Pages: 2

Brand: Olympus Pages: 3

BW Remote Operators Software Kit-A1

Brand: Canon Pages: 20

imageRUNNER 2420

Brand: Canon Pages: 30

Brand: Canon Pages: 51

imageCLASS LBP325dn

Brand: Canon Pages: 252

Brand: IBM Pages: 16

CLP-680ND: CLP-775ND

Brand: Samsung Pages: 2

Brand: Datecs Pages: 73

Brand: Datamax Pages: 12

E-Class Mark II

Brand: Datamax Pages: 40

Brand: Datamax Pages: 46

Brand: Nantian Electronics Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands