Canon Pixma MG3500 Series Online Manual Download Page 157 | Manualshive

Page: 157 / 769

background image

General Notes (Scanner Driver)

ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind
when using it.

Scanner Driver Restrictions

• When using the NTFS file system, the TWAIN data source may not be invoked. This is

because the TWAIN module cannot be written to the winnt folder for security reasons.
Contact the computer's administrator for help.

• Some computers (including laptops) connected to the machine may not resume

correctly from standby mode. In that case, restart the computer.

• Do not connect two or more scanner or multifunction printers with scanner function to

the same computer simultaneously. If multiple scanning devices are connected, you
cannot scan from the operation panel of the machine and also may experience errors
while accessing the devices.

• Scanning may fail if the computer has resumed from sleep or standby mode. In that

case, follow these steps and scan again.
1. Turn off the machine.
2. Exit ScanGear, then disconnect the USB cable from the computer and reconnect it.
3. Turn on the machine.

• ScanGear cannot be opened in multiple applications at the same time. Within an

application, ScanGear cannot be opened for the second time when it is already open.

• Be sure to close the ScanGear window before closing the application.

• When using a network compatible model by connecting to a network, the machine

cannot be accessed from multiple computers at the same time.

• When using a network compatible model by connecting to a network, scanning takes

longer than usual.

• Make sure that you have adequate disk space available when scanning large images at

high resolutions. For example, at least 300 MB of free space is required to scan an A4
document at 600 dpi in full-color.

• ScanGear and WIA driver cannot be used at the same time.

• Do not enter the computer into sleep or hibernate state during scanning.

157

«
...
155
156
157
158
159
...
»

Summary of Contents for Pixma MG3500 Series


































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pixma MG3500 Series

Brand: Samsung Pages: 347

SCX 6555N - MultiXpress Mono Multifunction

Brand: Samsung Pages: 180

SCX-4300 - SCX 4300 B/W Laser

Brand: Samsung Pages: 18

SCX-4521FG - B/W Laser - All-in-One

Brand: Samsung Pages: 215

SCX 6320F - B/W Laser - All-in-One

Brand: Samsung Pages: 332

SCX 4828FN - Laser Multi-Function Printer

Brand: Samsung Pages: 248

SCX 4725FN - B/W Laser - All-in-One

Brand: Samsung Pages: 253

ML 2851ND - B/W Laser Printer

Brand: Samsung Pages: 179

ML 2510 - B/W Laser Printer

Brand: Samsung Pages: 84

ML 1740 - B/W Laser Printer

Brand: Samsung Pages: 152

ML 1630 - B/W Laser Printer

Brand: Samsung Pages: 142

ML 1630 - B/W Laser Printer

Brand: Samsung Pages: 82

Brand: Samsung Pages: 2

Brand: Samsung Pages: 384

Lazett Combo SCX-4216F

Brand: Samsung Pages: 135

Brand: Samsung Pages: 414

SCX 6555N - MultiXpress Mono Multifunction

Brand: Samsung Pages: 112

scx-4100 series

Brand: Samsung Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands