Canon PIXMA GM4040 Online Manual Download

Page: 424 / 447

Removing Jammed Paper from Rear Side

Note

• If paper becomes jammed during printing and you need to turn off the printer to remove it, press the

printer's

Stop

button to stop the printing before you turn off the printer.

Make sure you have unplugged the power cord.

Rotate printer so that rear side of printer faces toward you.

Important

• When changing the orientation of the printer, do not turn the printer upside down or tilt it. The ink

may leak out.

Open rear tray cover and then pull up paper support.

Detach rear cover.

Pull out the rear cover.

424

Summary of Contents for PIXMA GM4040
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4040

Reviews:

Related manuals for PIXMA GM4040

Brands by name

Popular brands

Canon PIXMA GM4040, Online Manual

Search results

Summary of Contents for PIXMA GM4040

Reviews:

Related manuals for PIXMA GM4040

Brands by name

Popular brands