Canon PIXMA GM4000 Series Online Manual Download Page 277

Page: 277 / 447

Making Copies

This section describes the basic procedure to perform standard copying.

Check that printer is turned on.

Load paper.

Press the

COPY

button.

The Copy standby screen is displayed.

Load original document on platen or in ADF (Auto Document Feeder).

Confirm the page size (A) and magnification (B).

Note

• To change or confirm the page size, magnification, or other settings, press the

MENU

button, then

use the

button to display the desired setting item.

Setting Items for Copying

• Press the

COPY

button to reset the magnification to 100%.

Use the

button to specify the number of copies.

Press the

Start

button.

The printer starts copying.

Remove the original on the platen or from the document output slot after copying is complete.

Important

• If you load the original on the platen, do not open the document cover or remove the original while

Scanning...

is displayed on the screen.

• If you load the original in the ADF, do not move the original until copying is complete.

Note

• To cancel copying, press the

Stop

button.

• If you load the original on the platen, you can add the copying job while printing.

Adding the Copying Job (Reserve copy)

277

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands

Canon PIXMA GM4000 Series, Online Manual

Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Related manuals for PIXMA GM4000 Series

Brands by name

Popular brands