Canon PIXMA GM4000 Series Online Manual Download Page 205

Page: 205 / 447

Unsupported Media Types

Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also
the printer to jam or malfunction.

• Folded, curled, or wrinkled paper

• Damp paper

• Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing

on paper smaller than A5)

• Picture postcards

• Postcards

• Envelopes with a double flap

• Envelopes with an embossed or treated surface

• Envelopes whose gummed flaps are already moistened and adhesive

• Any type of paper with holes

• Paper that is not rectangular

• Paper bound with staples or glue

• Paper with an adhesive surface on the back such as label seal

• Paper decorated with glitter, etc.

205

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA GM4000 Series, Online Manual

Search results

Summary of Contents for PIXMA GM4000 Series

Reviews:

Brands by name

Popular brands