Canon PIXMA GM4000 Series Online Manual Download Page 197 | Manualshive

Page: 197 / 447

background image

Specifications

General Specifications

Interface

USB Port:

Hi-Speed USB *

Network Port:

Wired LAN: 100BASE-TX / 10BASE-T

Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b

* A computer that complies with Hi-Speed USB standard is required. Since the
Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be
used at USB 1.1.

USB and the network can be used at the same time.

Wi-Fi and wired LAN cannot be used at the same time.

Operating environment

Temperature:

41 to 95 °F (5 to 35 °C)

Humidity:

10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature
and humidity conditions.

Recommended conditions:

Temperature:

59 to 86 °F (15 to 30 °C)

Humidity:

10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper,
refer to the paper's packaging or the supplied instructions.

Storage environment

Temperature:

32 to 104 °F (0 to 40 °C)

Humidity:

5 to 95 % RH (no condensation)

Power supply

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Power consumption

Printing (Copy):

10 W or less *1

Standby (minimum):

0.8 W or less *1*2

OFF:

0.3 W or less

*1 USB connection to a PC

*2 The wait time for standby cannot be changed.

External dimensions (W x D x H)

Approx. 15.9 x 14.6 x 9.3 in. (Approx. 403 x 369 x 234 mm)

* With the Cassette and trays retracted.

Weight

Approx. 20.1 lb (Approx. 9.2 kg)

* With the Print Head installed.

197

«
...
195
196
197
198
199
...
»

Summary of Contents for PIXMA GM4000 Series
































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PIXMA GM4000 Series

Brand: Canon Pages: 18

Brand: Canon Pages: 16

Brand: Canon Pages: 39

Brand: Canon Pages: 2

Brand: Canon Pages: 73

Brand: Canon Pages: 29

Brand: Canon Pages: 16

Brand: Canon Pages: 44

Brand: Canon Pages: 60

Brand: Olympus Pages: 236

I450 - i 450 Color Inkjet Printer

Brand: Canon Pages: 13

Brand: Datamax Pages: 2

AdvancedPunch Pro

Brand: GBC Pages: 92

Brand: Oki Pages: 4

Brand: QMS Pages: 311

Brand: Oki Pages: 6

Brand: Oki Pages: 32

Brand: Oki Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands