Canon PIXMA G6000 Series Online Manual Download Page 165

Page: 165 / 492

Inside View

A: Scanning Unit / Cover

Scans originals. Open to refill ink tanks and to remove jammed paper.

B: Ink Tank Covers

Open to refill ink tanks.

C: Ink Tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

Refilling Ink Tanks

D: Upper limit line

Indicates the maximum capacity of the ink.

E: Single dot

Indicates the amount of ink required when performing ink flush.

F: Lower limit line

Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of
ink is below this line.

G: Ink Valve Lever

Operate when transporting a printer.

Transporting Your Printer

165

Summary of Contents for PIXMA G6000 Series













































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G6000 Series

Reviews:

Canon PIXMA G6000 Series, Online Manual, Page: 165 / 492

Search results

Summary of Contents for PIXMA G6000 Series

Reviews: