Canon PIXMA G6000 Series Online Manual Download Page 162

Page: 162 / 492

Front View

A: Document Cover

Open to load an original on the platen.

B: Paper Support

Extend to load paper in the rear tray.

C: Rear Tray Cover

Open to load paper in the rear tray.

D: Paper Guides

Align with both sides of the paper stack.

E: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

F: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Paper in the Rear Tray
Loading Envelopes in Rear Tray

G: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

Loading Paper in the Cassette

H: Paper Guides

Align with right/left/front sides of the paper stack.

I: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

162

Summary of Contents for PIXMA G6000 Series













































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G6000 Series

Reviews:

Canon PIXMA G6000 Series, Online Manual, Page: 162 / 492

Search results

Summary of Contents for PIXMA G6000 Series

Reviews: