Canon PIXMA G3070 Series Online Manual Download Page 148

Page: 148 / 472

Transporting Your Printer

When relocating the printer for changing your living place, make sure of the following.

Important

• You cannot take ink out of ink tanks.

•

• Check if the tank cap is completely inserted.

•

• Prepare for transporting the printer with the print head attached. This allows the printer to automatically

•

cap the print head, thus preventing it from drying.

• Do not remove the print head. Ink may leak.

•

• If ink stains the inside of the printer, wipe them using a soft cloth dampened with water.

•

• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.

•

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

•

protective material to ensure safe transport.

• Do not tilt the printer. Ink may leak.

•

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

•

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as

•

the printer may be damaged and ink in the printer may leak.

Select

Maintenance

on the HOME screen.

LCD and Operation Panel

Select

Transport mode

Confirm the message, then select

Yes

The mode is shifted to the transfer mode.

When it is completed, the power is turned off automatically.

Check that

lamp is off and

unplug power cord

148

Summary of Contents for PIXMA G3070 Series

























































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA G3070 Series

Reviews:

Related manuals for PIXMA G3070 Series

Brands by name

Popular brands

Canon PIXMA G3070 Series, Online Manual

Search results

Summary of Contents for PIXMA G3070 Series

Reviews:

Related manuals for PIXMA G3070 Series

Brands by name

Popular brands