Canon Pixma G3020 Series Online Manual Download Page 154

Page: 154 / 430

Inside View

A: Scanning Unit / Cover

Scans originals. Open to refill ink tanks and to remove jammed paper.

B: Tank Cap

Open to refill ink tanks.

C: Ink Tanks

The black ink tank is on the left, and the color ink tanks (cyan, magenta, and yellow) are on the right.

If any ink levels are low, refill the low tanks.

Refilling Ink Tanks

D: Upper limit line

Indicates the maximum capacity of the ink.

E: Single dot

Indicates the amount of ink required when performing ink flush.

F: Lower limit line

Indicates the lower limit of the sufficient amount of ink to print. Refill the ink tank before the amount of
ink is below this line.

G: Ink Valve Lever

Operate when transporting a printer.

Transporting Your Printer

H: Print Head Holder

The print head is pre-installed.

154

Summary of Contents for Pixma G3020 Series















































































































































































































































































































































































































































Search results

Summary of Contents for Pixma G3020 Series

Reviews:

Brands by name

Popular brands

Canon Pixma G3020 Series, Online Manual

Search results

Summary of Contents for Pixma G3020 Series

Reviews:

Brands by name

Popular brands