Canon PIXMA G2060 Series Online Manual Download Page 241

Page: 241 / 271

1300

Cause

Paper is jammed when feeding paper from rear tray.

What to Do

Remove the jammed paper following the instructions below.

Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.

Hold the paper with both hands, and pull it out slowly so as not to tear it.

Note

• If you cannot pull out the paper, turn the printer back on without pulling forcibly. The paper may

be ejected automatically.

• If paper becomes jammed during printing and you need to turn off the printer to remove it, press

the printer's

Stop

button to stop the printing before you turn off the printer.

• If the paper tears and you cannot remove the jammed paper from the paper output slot or the

rear tray, remove the paper from inside the printer.

Paper Is Jammed inside Printer

Reload paper and press printer's

button.

The printer resumes printing. Reprint the page you were printing if it was not printed properly due to
the paper jam.

If you turned off the printer in step 1, all jobs in the print queue are canceled. Redo the printing.

Note

• When reloading the paper, make sure you are using suitable paper and loading it correctly.
• We recommend using paper sizes other than A5 to print documents with photos or graphics. A5

paper may curl and jam as it leaves the printer.

241

Summary of Contents for PIXMA G2060 Series
















































































































































































































































































Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA G2060 Series, Online Manual

Search results

Summary of Contents for PIXMA G2060 Series

Reviews:

Brands by name

Popular brands