Canon PIXMA G2020 Series Online Manual Download Page 140

Page: 140 / 347

Ink level monitor

Select this menu from

Setup menu

•

Ink notification

Enables or disables the function which notifies the remaining ink.

Important

• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill

the ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may
prevent satisfactory print quality.

• When changing the remaining ink level notification function from disabled to enabled, it is

necessary to refill all ink tanks up to the upper limit line.

Refilling Ink Tanks

•

Reset ink lev. count

Resets the remaining ink count.

If you select

Yes

, you can reset the remaining ink count of all the ink tanks at once.

If you select

, you can specify the ink color and reset the remaining ink count in any ink tank.

Important

• After refilling the ink to the upper limit line of the ink tank, reset the remaining ink count.

If the remaining ink count is reset when the ink tank is not full, the remaining ink level cannot be
detected properly.

140

Summary of Contents for PIXMA G2020 Series




























































































































































































































































































































































Search results

Summary of Contents for PIXMA G2020 Series

Reviews:

Related manuals for PIXMA G2020 Series

Brands by name

Popular brands

Canon PIXMA G2020 Series, Online Manual

Search results

Summary of Contents for PIXMA G2020 Series

Reviews:

Related manuals for PIXMA G2020 Series

Brands by name

Popular brands