Canon PIXMA G2020 Series Online Manual Download Page 109

Page: 109 / 347

Front View

A: Operation Panel

Use to change the settings of the printer or to operate it.

Operation Panel

B: Document Cover

Open to load an original on the platen.

C: Paper Support

Extend to load paper in the rear tray.

D: Paper Guides

Align with both sides of the paper stack.

E: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

F: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Plain Paper / Photo Paper
Loading Envelopes

G: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

H: Output Tray Extension

Open to support ejected paper.

109

Summary of Contents for PIXMA G2020 Series




























































































































































































































































































































































Search results

Summary of Contents for PIXMA G2020 Series

Reviews:

Related manuals for PIXMA G2020 Series

Brands by name

Popular brands

Canon PIXMA G2020 Series, Online Manual

Search results

Summary of Contents for PIXMA G2020 Series

Reviews:

Related manuals for PIXMA G2020 Series

Brands by name

Popular brands