1
在
Mac OS
以無線方式安裝及連接
PIXMA E560
打印機
（以
Mac OS 12.4
作示範）
Installing PIXMA E560 on Mac OS via WiFi connection (Use Mac OS 12.4 as example)
**
注意
:
安裝驅動程式前請勿接駁
USB
線，以免系統發生錯誤
**
** Please don’t plug the USB cable until the driver asked to do so**
下載及安裝步驟
Driver download and Installation procedure
1.
到以下佳能網站並下載印表機的驅動程式
https://ij.manual.canon/ij/webmanual/WebPortal/PTL/ptl-
setup.html?lng=tc&type=gscard&mdl=E560&area=as_grp&os=m
Go to below Canon webpage and download the printer driver
https://ij.manual.canon/ij/webmanual/WebPortal/PTL/ptl-
setup.html?lng=en&type=gscard&mdl=E560&area=as_grp&os=m
2.
根據作業系統版本，按下載鍵，完成後開啟該檔案安裝
Refer to OS version, press the Download button, and then execute the file after download was completed
3.
按［
Setup
］
Click [Setup]
Summary of Contents for PIXMA E560
