Canon PIXMA E300 series, Online Manual

Page: 229 / 339

3. Enter IP address or host name and click Next .
Printer search starts.
If an error screen appears:
Resolve the error according to the instruction on the screen.
If the IP address you entered is already used for another device, specify printer's IP address. For
Windows, you can specify it using IJ Network Device Setup Utility.
Important
• If firewall is enabled on the computer, printers on a different subnet may not be detected. Disable
firewall.
If firewall interferes with printer search:
• If message appears:
If a message appears warning that Canon software is attempting to access the network, set the
security software to allow access.
After allowing the software to access, specify the IP address or host name and search for printers
again.
If the printer is found, follow the instructions on the screen to continue to set up the network
communication.
• If no message appears:
Cancel searching printers, and then set the security software to allow Canon software below to
access the network.
◦ For Windows:
The following downloaded files or those on the Setup CD-ROM
■ Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder
■ MSetup64.exe
■ win > MSetup64.exe
■ win > MSetup.exe
◦ For macOS:
Downloaded Setup.app
After setting the security software, specify the IP address or host name and search for printers again.
Note
• For more on firewall settings of your operating system or security software, see instruction manual or
contact its manufacturer.
229