Canon Perfect Binder-C1, Replacement Manual

Page: 28 / 54

Chapter 2
2-10
3) Remove the top cover mount [1].
- 5 screws [2]
F-2-39
4) Release the harness from the three wire saddles [1], and then remove the
six connectors [2].
F-2-40
5) Remove the switch-back flapper motor assembly.
- 2 screws [2]
F-2-41
6) Remove the SB flapper gear [2].
- E-ring [1]
- Straight pin [3]
F-2-42
F-2-43
2.1.16 Before replacing the SB flapper unit (15 million
sheets)
0024-6836
1) Remove the top cover.
2) Remove the front upper cover.
(page 2-3)
Reference[Removing the
Front Upper Cover]
3) Remove the rear upper cover.
(page 2-4)
Reference[Removing the Rear
Upper Cover]
4) Remove the SB flapper gear.
(page 2-9)
Reference[SB flapper gear (15
million sheets)]
[2] [2]
[1]
[2]
[1] [2]
[2]
[1] [2]
[2]
CAUTION:
While reassembling, attach the SB flapper gear so that the sensor flag of the
gear is positioned downwards when the flapper hangs down.
[1] [2] [3]