![background image](http://html.mh-extra.com/html/canon/perfect-binder-b1/perfect-binder-b1_troubleshooting-manual_58071223.webp)
Measures when E5AA-000x, E5AA-800x or the trimming assembly
breakage occurs (Perfect Binder-B1/D1)
[Symptom]
E5AA-000x, E5AA-800x or the trimming assembly breakage may occur in the booklet mode.
- E5AA-000x : Error in Cutter Motor (M35) of Perfect Binder (x=1,2,3,4,5,6,7)
- E5AA-800x : Error in Cutter Motor (M35) of Perfect Binder (x=1,2,3,4,5,6)
[Cause]
If the trimming blade continues to be used after it exceeds the expected service life of 40,000 cutting times, or if the drive torque
at the time of trimming is raised due to the paper type, the above-mentioned errors occur. If continuing trimming without replacing
the trimming blade even after the occurrence of the above-mentioned errors, the trimming drive assembly (including the press
ball screw) and the peripheral components of the trimming drive assembly may break. (Refer to Service Information Ref.No.: F3-
T01-00W-10541)
The photos below show the trimming assembly that is pulled out and seen from the lower side. The black arrows indicate the
front direction.
Figure [a] shows the broken section of the trimming drive assembly.
Figure [b] shows the broken section of the peripheral component of the trimming drive assembly.
Figure [c] shows the broken section of the rear stay.
221