Canon PC1057 User Manual Download Page 138

Page: 138 / 207

Automated Playback (Slide Show) (continued)

134

Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 998
images may be marked per slide show. Images display in the order
of their selection.

When the slide show is over, press the MENU button.

The slide show menu appears again. Press the

MENU

button

again to close the menu.

Movie images play for the length of time that they were recorded
regardless of the time set in the slide show settings.

The power saving function is disabled while a slide show plays
on the camera (p. 31).

Display the slide show menu
(p. 133).

Press the

arrow on the omni

selector to select [Program].
Press the

arrow to select

[Show 1], [Show 2] or [Show 3].

A check mark will appear beside a show
already containing images.

Press the

, and

arrow on the omni selector

to choose [Select] and press the SET button.

Mark images to include in the
show.

Single Image Playback

Move between images using the main
dial or the

arrow on the omni

selector and mark or remove marks from
images using the

arrow on the

omni selector.

The selection number and a check mark
appear at the top of selected images.

Summary of Contents for PC1057
















































































































































































































Search results

Summary of Contents for PC1057

Reviews:

Canon PC1057, User Manual, Page: 138 / 207

Search results

Summary of Contents for PC1057

Reviews: