manualshive.com logo in svg

Canon PC1057, User Manual, Page: 110 / 207

Share
Download
Canon PC1057 User Manual Download Page 110

106

 Locking the Flash Exposure Setting 

(FE Lock)

You can obtain the correct exposure with flash photography 
regardless of the location of your subject in the composition.

Mode Dial

1

Press the   (Flash) button and set the flash to fire 
(p. 62).

z

If you are using an externally mounted flash, please refer to its 
manual for setting instructions.

2

Focus the AF frame or the spot metering frame on 
the subject on which you wish to lock the flash 
exposure setting and press the shutter button 
halfway.

3

While pressing the shutter button halfway, press the 

 button.

z

The exposure setting locks (FE lock) and the 

 icon appears on 

the LCD monitor (or in the viewfinder).

z

The flash will fire a pre-flash and lock the flash exposure to the 
required intensity to illuminate the subject.

z

Each time you press the 

 button, the flash exposure fires a pre-

flash and locks at the required intensity for that composition.

z

Using any button or lever other than the main dial cancels the FE lock.

4

Recompose the image and shoot.

z

The FE lock only functions with the built-in flash, an externally 
mounted EX series Speedlite, a Macro Ring Lite or a Macro Twin 
Lite.

z

The FE lock function is not available when [Flash Adjust] is set to 
[Manual].

Summary of Contents for PC1057
















































































































































































































Reviews:

No comments