Glue the six surfaces of part 1 marked
with to the rear side of part 2.
Although a mountain fold is used for the
folds in the blades of grass on part 2,
fold them outward where indicated here
to make it easier to work with part 1.
Complete the pot by
gluing the bottom in
place.
Assembling the pot
2-1
2-2
1-2
1
2
1-1
1-3
The bottom
of the pot
Before starting assembly:
Writing the number of each section on its back side before cutting
out the sections is highly recommended.
(* This way, you can be sure which section is which even after
cutting out the sections.)
Indicates where
sections should be glued together.
Indicates where to
insert sections. Do not glue the
sections together.
Assembly Instructions : Three A4 sheets (No. 1 to No. 3)
1
Halloween tree : Assembly Instructions
©
Canon Inc.
©
TakaTaka
