manualshive.com logo in svg

Canon OPTURA200 MC, Instruction Manual, Page: 41 / 192

Share
Download
Canon OPTURA200 MC Instruction Manual Download Page 41

41

E

Using the Full 

Range of Featur

es

Selecting from the Menus

1. Turn the POWER switch and the TAPE/CARD switch to the

desired settings.

2. Press the MENU button to open the menu.

• One of the main menus appears, according to the settings of the

TAPE/CARD switch and the POWER switch.

3. Pull the selector dial up or down and move the arrow to the

desired submenu.

4. Press the selector dial in to select.

• The submenu appears.

5. Pull the selector dial up or down and move the arrow to the

desired function.

6. Press the selector dial in to select.

• The function and its settings only appear.

7. Pull the selector dial up or down and move the arrow to the

desired setting.

• If you are setting a function other than the white balance or shutter

speed, the function will be set if you skip to step 11.

8. Press the selector dial in to select.

• The function is set and you return to the submenu.

9. Pull the selector dial up or down and move the arrow to 

b

RETURN.

10.Press the selector dial in to select.

• You return to the main menu.

11.Press the MENU button.

• The main menu disappears.

Notes:

• Pressing the MENU button at any time closes the menu.
• Selecting 

b

RETURN takes you back one menu, or closes the main menu.

/

/

TV SCREEN

SET

2, 11

3-10

M

E

N

U

MENU

SE

LE

CT

Summary of Contents for OPTURA200 MC

































































































































































































Reviews:

No comments