Canon OMNERA 400T, Operator'S Manual

Page: 15 / 166

Operator´s Manual
0180-095-418-EN Rev. 6.1 OMNERA®
2020-09-18 Page 7
1.3.5 0055 Two Column Table 0055 Overview
0
02003
Head end
Foot end
1
2
3
4
5 6 7
8
Z
Y
X
0
9
10
Fig. 1-6 Table overview
1. Foot plate
2. Column
3. Table top (X/Y/Z)
4. Table hand control (X/Y/Z) Ceiling
tube pendulum movement)
5. Detector holder
6. Brake release button for detector
holder
7. XY foot control strip type (option)
8. Foot control table (X/Y/Z) (option)
9. Collimator hand control (option)
10. Emergency stop
1.3.5.1 Intended use, two column table 0055
The two column table is only intended to be used by trained radiographers, service techni-
cians and product specialists.
The two column table is a flexible high performance patient support system that is intended
to be used in X-ray systems for radiographic examinations.
The table is intended for use in a hospital environment during radiographic diagnostic exami-
nations together with an X-ray tube support and a detector holder.
The main purpose of the table is to supply the patient with a positioning support during a di-
agnostic examination and to make it possible to position the detector.
Other use of the two column table may result in potentially hazardous conditions to the oper-
ator and/or patient.
The two column table can also be supplemented with external products, such as detectors,
detector holders, grids, ion chambers and accessories supplied by Arcoma AB and intended
for use with the Table 0055.
The design of the two column table allows a wide range of detectors, of various types and
models, to be adapted to the system. The flexibility of the two column table also ensures ex-
tensive possibilities for customizing of functions and design.
Introduction
System description