Canon OCT-A1 Operation Manual Download Page 98

Page: 98 / 276

6 Capturing Images

Adjusting the Focus

Adjust the focus to make the image sharper.

Operate the focus slider. Either click or , or drag the orange dot.

Automatic

focus button

Focus slider

Important

Checking the Result of Focus Adjustment

Adjust the focus so that the OCT live image is at the sharpest position.

Information

Using the Mouse Wheel

You can do the same operation as the focus slider by placing the cursor on the SLO
live image and turning the mouse wheel.

Automatic Focus

The focus is automatically adjusted by clicking the automatic focus button.

Showing the Focus Adjustment Value

The adjustment value appears under the focus slider. Use this as a reference when
adjusting the focus.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 98

10/26/2020 10:49:40 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands