Canon OCT-A1, Operation Manual

Page: 79 / 276

5 Patient Management
79
Selecting Study Orders from the Worklist
The worklist is retrieved from HIS/RIS. Set the maximum number of items that can be
retrieved at one time in the [MWL Settings] screen (see page 226). Also, HIS/RIS can
be notified when an examination is implemented.
1
Click the [Work List] tab.
The worklist appears.
2
Select a study order.
Information
Searching for Study Orders in the Worklist
Enter a text string in the patient information entry field. Matching study orders appear.
Updating the Worklist
Click [Update]. The worklist is re-acquired.
3
Click the [OCT Capture] tab.
The patient information registered to the study order is registered in the patient list, and
the [OCT Capture] screen appears.
Information
If content that cannot be registered on the software is entered, a message screen
appears. If [OK] is clicked, corresponding items are registered as blank. If [Cancel] is
clicked, patient information is not registered to the patient list and the [OCT Capture]
screen does not appear.
Information
When Duplicate Patients are Registered to the Patient List
A message screen appears if there are items that do not match existing patient
information. If [OK] is clicked, the items that do not match are overwritten. If [Cancel]
is clicked, the items are not overwritten and the [OCT Capture] screen does not
appear.
BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 79 10/26/2020 10:49:37 AM