manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 54

54

4 Basic Operation

Preparing to Capture Images

Preparing the OCT

1 

 Remove the dust cover and the objective lens cap.

2 

Insert the power plug all the way into an AC outlet.

3 

Turn on the power to the OCT.

The OCT does an initialization sequence (internal 
check and positioning of the measurement unit). After 
the initialization, the measurement unit moves and 
stops at its initial position.

CAUTION

The measurement unit moves during initialization - keep the patient’s chin 
away from the chin rest and do not touch the measurement unit.
There is a risk of injuring the patient.

4 

Turn on the power to the computer and the monitor.

The RX Capture for OCT is started automatically, and the login screen appears.

5 

Enter the user ID and password, and then click [Log In].

The [Patient] screen appears.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   54

10/26/2020   10:49:28 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands