Canon OCT-A1 Operation Manual Download Page 157

Page: 157 / 276

7 Report

157

Saving OCT Images as Image Files

All OCT images acquired by a single image capture operation can be saved as image
files.

Click [Output].

Or, right-click the examination list, and select [Output] from the menu.
The [Select Output Destination] screen appears.

Select output destination, and then click [OK].

The image file is saved to a pre-specified folder.

Information

For details on output destination settings, see "Output Settings" (see page 218).

Saving the Currently Shown OCT Image as an Image

File

Right-click the OCT image, and select [Save As] from the menu.

Specify the save destination, and click [Save].

Saving the Currently Shown SLO Image as an Image

File

Right-click the SLO image, and select [Save As] from the menu.

Specify the save destination, and click [Save].

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 157

10/26/2020 10:49:56 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands