manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 144

144

7 Report

3D Analysis

The data of the OCT images captured in the [Macula 3D], [Glaucoma 3D], [Disc 3D], 
[Wide 3D], [Custom 3D], [Anterior 3D], and [OCTA] modes is shown as a 3D image. Four 
types of view formats are available for 3D tomogram images: [Volume], [Solid], [Cross-
Section], and [Angiography].
This analysis can be shown in the [3D] tab screen.
The [Angiography] display format is available only when an OCTA image exists.

[Volume] View

Shows the SLO image, vitreous, layers of the retina, and choroid as semi-transparent 
images.

8

9

1

3

4

5

6

7

2

10

1.   3D tomogram image

This 3D image is constructed from B-scan data.

Information

Changing the Color of 3D Tomogram Images

Right-click the 3D tomogram image, and select [Gray Scale] or [False Color] from the 
menu.

2.   SLO image

Information

Switching SLO Image Show/Hide

Right-click the 3D tomogram image, and select [SLO on the bottom] from the menu.

3.   3D view mode

Select the format for viewing 3D tomogram images.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   144

10/26/2020   10:49:51 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands