manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 143

7 Report

143

Information

The examinations that have all the same information for the capture date, right/left 
eye, scan mode, scan pattern and scan size are displayed.
You can select up to nine examinations.

2 

Select any examinations, and then click [OK].

When averaging is complete, the [Report] screen reappears.

Information

[Averaged OCTA] appears as the scan mode for the averaged examinations.

[Progression] Tab Screen

The following describes the elements that are different from those on the [Single] tab 
screen. The other elements are the same as those on the [Single] tab screen.

1

1.   [Show Difference] check box

When this box is selected, the difference from the oldest examination (leftmost 
examination) is shown on the color map and grid display for the area density or skeleton 
density.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   143

10/26/2020   10:49:51 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands