manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 123

7 Report

123

[Progression] Tab Screen

1

2

3

4

5

1.   SLO image

The map to overlay on the SLO image can be selected from the list box. Values 
corresponding to the map are shown on the NFL+GCL+IPL grid.

• 

[NFL+GCL+IPL Thickness]: Shows the NFL+GCL+IPL thickness map for five 
examinations.

• 

[NFL+GCL+IPL Difference]: Shows the difference from the oldest examination (leftmost 
examination) as a color map and values. An NFL+GCL+IPL thickness map is shown for 
the oldest examination.

2.   NFL+GCL+IPL Deviation map

Same as [Both Eyes] tab screen.

3.   NFL+GCL+IPL Significance map

Same as [Both Eyes] tab screen.

4.   NFL+GCL+IPL trend graph

This plots all examinations performed for the same patient to show changes in the 
NFL+GCL+IPL thickness over time. The selected examination is indicated in blue, four 
examinations displayed on the reports are indicated in brown, and other examinations 
are indicated in black. Background colors are color-coded on the basis of the normative 
database.
You can select what to show on the graph from the list box.

• 

[Total Sectors Average Thickness]: Average value of thickness of total NFL+GCL+IPL 
grid

• 

[Superior Average Thickness]: Average value of thickness in superior region of 
NFL+GCL+IPL

• 

[Inferior Average Thickness]: Average value of thickness in inferior region of 
NFL+GCL+IPL

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   123

10/26/2020   10:49:45 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands