manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 121

7 Report

121

NFL+GCL+IPL Analysis/GCL+IPL Analysis

The NFL+GCL+IPL and GCL+IPL thicknesses are analyzed on the basis of the captured 
OCT image of the posterior part of the retina including the macula and optic disc in the 
[Glaucoma 3D] mode.
The analysis results are shown, for example, as a map relating to the NFL+GCL+IPL 
or GCL+IPL thickness and NFL+GCL+IPL or GCL+IPL grid indicating the superior and 
inferior regions or symmetry of the right and left eyes.
These analysis results can be shown on the [Both Eyes], [Progression], and [Combined] 
tab screens.
For details on the color patterns of NDB, see “NFL+GCL+IPL Analysis/GCL+IPL 
Analysis/Optic Disc Analysis/Wide 3D Scan Analysis” (see page 154).
The following describes an example of how to perform NFL+GCL+IPL analysis.
To perform GCL+IPL analysis, right-click either SLO image/NFL+GCL+IPL grid, or 
NFL+GCL+IPL Deviation map, or NFL+GCL+IPL Significance map, and select the 
[GCL+IPL Analysis] from the menu.

[Both Eyes] Tab Screen

1

2

5

4

3

1.   SLO image/NFL+GCL+IPL grid*

The map to overlay on the SLO image can be selected from the list box. Values 
corresponding to the map are shown on three types of grids.

• 

[NFL+GCL+IPL Thickness]: Thickness of NFL+GCL+IPL

• 

[NFL+GCL+IPL Difference (S - I)]: Difference between thicknesses of superior and 
inferior regions at NFL+GCL+IPL

• 

[NFL+GCL+IPL Difference (R - L)]: Difference among thicknesses of NFL+GCL+IPL on 
right and left eyes

• 

[SLO Image]: Image overlay disabled

*  The area to calculate NFL+GCL+IPL thickness has been modified from the circle 10 

mm in diameter to the area except the optic disc since the version 3.0.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   121

10/26/2020   10:49:45 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands