manualshive.com logo in svg

Canon Oce VarioPrint 6000+ Series, Operation Manual, Page: 104 / 222

Share
Download
Canon Oce VarioPrint 6000+ Series Operation Manual Download Page 104

Print your jobs using the operator panel

Introduction to the [Jobs] view

Introduction

The [Jobs] view enables you to manage the print jobs on the machine locally. The [Jobs] view is
divided in the [Queues] and [Printed jobs] views. This section describes the items of both views.

NOTE

Whether a button is enabled depends on the number of selected jobs and the state of the jobs.

Not all buttons are available for streaming jobs  .

[42] The [Scheduled jobs] view

The items of the [Scheduled jobs] view of the [Jobs] view

Description of the [Scheduled jobs] view

Item

Function

More information

[Scheduled jobs]

Display the active print job   and the
jobs that are scheduled for printing.

[Properties] button

Check or change the properties of a
job. The button is only enabled when
you select 1 job.

NOTE

You can also press a job 2
times to check or change
the properties of that job.

4

Print your jobs using the operator panel

104

Chapter 7 - Carry out print jobs

Summary of Contents for Oce VarioPrint 6000+ Series































































































































































































































Reviews:

No comments