manualshive.com logo in svg

Canon Oce VarioPrint 6000 MICR Series, Operation Manual, Page: 44 / 48

Share
Download
Canon Oce VarioPrint 6000 MICR Series Operation Manual Download Page 44

Item

Specification

Supported applications 

• Océ VarioPrint 6000 MICR line printer driver
• Océ PRISMAprepare (6.3.1 and higher)
• Océ PRISMAaccess (5.4.4 and higher)
• Océ PRISMAproduction (5.04.04 and higher)
• Océ PRISMAdirect (1.3.1 and higher)
• Océ PRISMAspool 4.06.02
• Océ VPconvert (7 and higher)
• Xerox

®

 FreeFlow™ MakeReady (7 and higher)

• EFI

®

 Fiery Central 1.8.2

• Kodak

®

 Smartboard 5 (limited)

• GMC PrintNet 7.0.29
• InfoPrintManager AIX 4.3

Certification

PIRA

Online finishing (external finisher)

Via DFD2 interface

Security 

Common Criteria EAL2+, E-shredding, HTTPs, Firewall,
PIN for DocBox, User authentication to SDS, IPv6, soft-
ware protection license (integrity checker), user authenti-
cation per user role: key operator, system administrator
and service representative.

Product specifications

44

Appendix A - Miscellaneous

Océ VarioPrint 6000 MICR line

Summary of Contents for Oce VarioPrint 6000 MICR Series

















































Reviews:

No comments