Océ VarioPrint 6000+ Customer Expectations Document
Version 1
Océ VarioPrint 6000+ Series Customer Expectations Document
Page 51
15.2 Media Specific Adjustments
The media specific adjustments are for customers who want to precisely adjust the
image position due to the type of media.
The following settings can be manually adjusted through the Settings Editor >
Media > select a registered media type > Registration icon. The Settings Editor can
only be accessed via a Web browser using the IP address of the Océ VarioPrint
6000+ Series.
The IP address of the Océ VarioPrint 6000+ Series is found on the machine’s
operator panel through System > Local key operator settings > Connectivity >
TCP/IP address.
The table below describes the Edit media registration settings and each setting’s
description.
Setting
Description
X image shift front (0.01 inches)
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper in the
feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
X image shift back (0.01 inches)
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper in the
feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
Z image shift front (0.01 inches)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the front side.
(From ±500 mm in 0.1 mm increments)
Z image shift back (0.01 inches)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction on the back side.
(From ±500 mm in 0.1 mm increments)
X elongation front (0.1 ‰)
Make a fine adjustment to the image size from the feed direction
on the front side.
(From ±250% in 0.01% increments)
X elongation back (0.1 ‰)
Make a fine adjustment to the image size from the feed direction
on the back side.
(From ±250% in 0.01% increments)
