manualshive.com logo in svg

Canon Oce VarioPrint 110, Manual, Page: 48 / 53

Share
Download
Canon Oce VarioPrint 110 Manual Download Page 48

Version 7 

Océ VarioPrint 110 Customer Expectations Document 

Page 48 

15.2 Media Specific Adjustments 

 
The media specific adjustments are for customers who want to precisely adjust the 
image quality per paper type that is registered in the machine. 
 

The following settings can be manually adjusted through the Settings Editor > 
Media > select a registered media type > Registration icon. The Settings Editor can 
only be accessed via a Web browser using the IP address of the Océ VarioPrint 
110. 
 
The IP address of the Océ VarioPrint 110 is found on the machine’s operator panel 
through System > Local key operator settings > Connectivity > TCP/IP address. 

 
The table below describes the Edit media registration settings and each setting’s 
description. 
 

Setting 

Description 

X image shift front (0.01 inches) 

Make a fine adjustment to enable printing with the correct 
alignment of the image from the leading edge of the paper 
in the feed direction on the front side. 
(From ±500 mm in 0.1 mm increments) 

X image shift back (0.01 inches) 

Make a fine adjustment to enable printing with the correct 
alignment of the image from the leading edge of the paper 
in the feed direction on the back side. 
(From ±500 mm in 0.1 mm increments) 

Z image shift front (0.01 inches) 

Make a fine adjustment to enable printing with the correct 
alignment of the image from the side edge of the paper 
perpendicular to the feed direction on the front side. 
(From ±500 mm in 0.1 mm increments) 

Z image shift back (0.01 inches) 

Make a fine adjustment to enable printing with the correct 
alignment of the image from the side edge of the paper 
perpendicular to the feed direction on the back side. 
(From ±500 mm in 0.1 mm increments) 

X offset (0.01 inches) 

Make a fine adjustment to the margin of the image from 
the leading edge of the paper in the feed direction. 
(From ±25 mm in 0.1 mm increments)

 

Z offset (0.01 inches) 

Make a fine adjustment to the margin of the image from 
the side edge of the paper perpendicular to the feed 
direction. 
(From ±25 mm in 0.1 mm increments)

 

X elongation front (0.1 ‰) 

Make a fine adjustment to the image size from the feed 
direction on the front side. 
(From ±250% in 0.01% increments) 

X elongation back (0.1 ‰) 

Make a fine adjustment to the image size from the feed 
direction on the back side. 
(From ±250% in 0.01% increments) 

S adjust (0.01 inches) 

Make a fine adjustment to the image to straighten out a 
skewed image. 
(From ±25 mm in 0.1 mm increments) 

Trapezoid (0.01 inches) 

Make a fine adjustment to the image to straighten out a 
trapezoidal image. 
(From ±25 mm in 0.1 mm increments) 

Diamond shape adjust (0.01 
inches) 

Make a fine adjustment to the image to straighten out a 
diamond-shaped image. 
(From ±25 mm in 0.1 mm increments) 

Summary of Contents for Oce VarioPrint 110






















































Reviews:

No comments