manualshive.com logo in svg

Canon Oce VarioPrint 110, Manual, Page: 14 / 53

Share
Download
Canon Oce VarioPrint 110 Manual Download Page 14

Version 7 

Océ VarioPrint 110 Customer Expectations Document 

Page 14 

IMPORTANT 

•

 The Océ VarioPrint 110 was created to be modular in design. Floor space, 

budget, monthly copy/print volume, and applications will determine which 
configuration works best. 

•

 The maximum configuration (fully configured machine) includes the Main Unit, 

Duplex Color Image Reader-D1, ePIM-C1, Document Insertion Unit-F1, High 
Capacity Stacker-E1 (x 2) or High Capacity Stacker-F1 (x 2), Paper Folding 
Unit-F1, Saddle Finisher-AF2, Booklet Trimmer-D1, and Two Knife Booklet 
Trimmer-A1. 

•

 The optional High Capacity Stacker-F1 is not shown in the configuration 

diagrams above. 

•

 The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not 

shown in the configuration diagrams above. If the SDD Square Fold  
Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure 
that there is approximately 62.6” (1,592 mm) of space added to the installation 
space and floor design. 

•

 The optional SDD Square Fold Booklet-Maker is not shown in the configuration 

diagrams above. If the SDD Square Fold Booklet-Maker is attached to the 
machine, make sure that there is approximately 43.3” (1,100 mm) of space 
added to the installation space and floor design. 

•

 There needs to be approximately 1/5” (5 mm) of space in between each 

accessory attached. 

•

 Keep the back of the machine at least 18” (457.2 mm) away from a wall (only if 

the main engine, optional ePIM-C1, and either the Finisher-AF1 or Saddle 
Finisher-AF2 are attached). For all other configurations, keep the back of the 
machine at least 31” (787.4 mm) away from a wall. 

•

 Make sure that approximately 55” (1,397 mm) of space is provided around the 

front, approximately 39.4” (1,000 mm) of space is provided around the left side, 
and approximately 23.6” (600 mm) of space is provided around the right side of 
the machine for the proper servicing of the equipment. 

•

 The floor must be level (with no bows) for the stabilization and support of the 

machine. 

•

 The machine should not be moved once it is in place. 

 

3.4  Floor Structure Requirements 

 
The floor on which this machine is installed must have strength of at least 
100 lb/ft

2

 (488 kg/m

2

). If the floor does not have this level of strength, consult a 

building contractor before installing the machine. 
 
The weight of the machine is distributed on the floor through the adjusters and 
wheels. Do not install the machine on an unstable floor or platform. 
 

Summary of Contents for Oce VarioPrint 110






















































Reviews:

No comments