Canon Oce TDS Series, Administration Manual

Page: 14 / 138

Printer Windows Server 2012 / Server 2012 R2 (64-bit operating systems)
Remark Full support of Windows Server 2012 R2 from WPD2 v2.9 and PS3
1.23
Océ TCS400 PS3 (from 1.22)
Océ TCS500
WPD2
(from 2.9)
PS3 (from 1.22)
Océ TDS300
PS3
(from 1.22)
Océ TDS320
WPD2
(from 2.9)
PS3
(from 1.22)
Océ TDS400 PS3 (from 1.22)
Océ TDS450 WPD2 (from 2.9)
PS3 (from 1.22)
Océ TDS600 PS3 (from 1.22)
Océ TDS700 WPD2 (from 2.8)
PS3 (from 1.22)
Océ TDS750 WPD2 (from 2.8)
PS3 (from 1.22)
Océ TDS800 WPD2 (from 2.11)
PS3 (from 1.22)
Océ TDS860 WPD2 (from 2.11)
PS3 (from 1.22)
Printer discovery with Océ WPD/WPD2
At installation time, the Océ WPD and WPD2 printer drivers can automatically detect the printer(s)
available on your network. This is the printer discovery.
A printer which is automatically detected with the printer discovery is called a 'detectable printer'.
In order to be detected, the printer must:
• be detectable (i.e. old versions of printer systems are not detectable and should be upgraded),
• be connected to the same sub-network as the one of the workstation on which you install the
printer driver,
• be powered on,
• have the 'Ready' status.
Find below the lists of the detectable printers and the version from which they are detectable.
• Océ TCS300 - R1.8.2
• Océ TCS500 - R1.8.2
• Océ TDS320 - R1.0.13
• Océ TDS450 - R3.8.2
• Océ TDS600 - R4.1.13
• Océ TDS700 - R1.8.2
• Océ TDS750 - R1.2.2
• Océ TDS800 - R2.1.13
• Océ TDS860 - R1.0.13
Compatibility matrix of the printer drivers
14 Chapter 1 - Introduction
Océ TDS/TCS/TC Connectivity information for Windows environments