Canon Oce TDS Series, Administration Manual

Page: 113 / 138

SNMP specifications and compatibility
Introduction
IMPORTANT
The SNMP section only applies to the Océ TDS printers listed below.
It is possible to retrieve information by means of SNMP protocol on:
• Océ TDS 450 v3.1 and higher
• Océ TDS 750 from v1.2.2
The two following Objects Identifiers (OID) are supported:
• hrDeviceId (OID 1.3.6.1.2.1.25.3.2.1.4)
• SysDescr (OID 1.3.6.1.2.1.1.1)
SNMP parameters
On the Océ TDS450 Power Logic Controller (PLC), you can access the following SNMP
parameters:
• Enable/Disable SNMP protocol
• The following community names:
- Océ Read/Write Community name
- Océ Read Community name
- SNMP Community name
These community names can be changed.
Compatibility and performance
SNMP v1 and v2c are supported.
SNMP is available in Normal and Medium security levels.
NOTE
The 'Medium' and the 'High' security levels are available for all the Océ TDS/TCS systems.
The compatible Océ systems are able to handle 25 OIDs get/set requests per seconds.
Limitations
SNMP over IPv6 is not supported. For more information about IPv6 environment, see: Printer
compatibility with IPv6 on page 52 .
SNMP specifications and compatibility
Chapter 6 - Simple Network Management Protocol (SNMP) 113
Océ TDS/TCS/TC Connectivity information for Windows environments