manualshive.com logo in svg

Canon Oce TC Series, Administration Manual

Share
Download
Canon Oce TC Series Administration Manual Download Page 10

Introduction for the reader

Introduction

The Océ TDS/TCS/TC Connectivity information for Windows environments manual applies to the
next environments:
• Windows Server 2008 R2
• Windows 7
• Windows 8
• Windows Server 2012
• Windows 8.1
• Windows Server 2012 R2
• Windows 10

It describes the configuration procedures for printing in a Windows TCP/IP environment:
• How to setup the Océ TDS/TCS controller.
• How to install a dedicated Print Server and a client workstation in order to work in a Client/

Server configuration.

• How to configure the client workstation in a Peer to peer configuration.
• How to print using the FTP protocol.

The first chapter gives an introduction to the protocols, connections and printing solutions for the
Océ Large Format Printing Systems.

Then, according to the printing configuration you want to define, consult the proper chapter.

Scan-to-File to a Windows computer

From your printing system, you can also scan a file and send it to a Windows workstation.

Refer to the Océ LF Systems Connectivity Manual for Scan-to-File.

List of abbreviations

Abbreviation

Full expression

LAN

Local Area Network

PS3

Océ printer driver for Adobe® PostScript® 3™ - also known as Océ
PostScript® 3™ driver

TCS

Technical Colour System

TDS

Technical Document System

TDS3x0

Océ TDS300 and Océ TDS320

TDS4x0

Océ TDS400 and Océ TDS450

TDS7x0

Océ TDS700 and Océ TDS750

TDS8x0

Océ TDS800 and Océ TDS860

WPD

Océ printer driver for Windows® - also known as Océ Windows® Print-
er Driver

WPD2

Océ printer driver 2 for Windows® - also known as Océ Wide format
Printer Driver 2 for Microsoft® Windows®

Introduction for the reader

10

Chapter 1 - Introduction

Océ TDS/TCS/TC Connectivity information for Windows environments

Summary of Contents for Oce TC Series











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands