manualshive.com logo in svg

Canon Oce PlotWave 450, Operation Manual

Share
Download
Canon Oce PlotWave 450 Operation Manual Download Page 73

Configure the network and security settings

Configure the network settings in Océ Express WebTools

Introduction

Some of the network settings are configured during the installation of your system. When you
want to define more network settings, you can do so under the [Configuration] tab.

NOTE

For more detailed information on network settings, refer to the Océ LF Systems Connectivity

manual.

Procedure

1.

Open the [Configuration] - [Connectivity] tab.

2.

Click [Edit] in the upper right hand corner of the [Network adapter] section. Here you can edit all
the settings of the group in one window.
or

3.

Click on a single setting in the list to edit only one setting.
For example, click on the value of the IP type setting to display a window where you can change
the value.

NOTE

You can always find a short explanation of the setting in the tooltip.

4.

Click [Ok] to confirm, or [Cancel] to reject your entries.

Configure the network and security settings

Chapter 3 - Define your Workflow with Océ Express WebTools

73

Summary of Contents for Oce PlotWave 450











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands